200kg servo motor tensile strength tester for stainless steel
The machine uses a single arm structure, from the column, the beam,
the beam, table composition. The speed control system is installed
on the lower part of the workbench. The servomotor with high
precision and wide speed range and stable performance drives the
ball screw to rotate by the synchronous toothed belt deceleration
system. The ball screw drives the cross beam and drives the
stretching and attaching (Or compression, bending attached) up and
down to achieve the sample loading and unloading. The structure has
the advantages of high rigidity, high efficiency and stable
Meet the standards: GB / ISO7500 ASTMD638 D412 JISB7721 / B7733
Capacity selection: 200kg
Units Switching: Kgf, lbf, N, KN, ton
Decomposition degree: 1 / 200,000
Load accuracy: ± 0.1%
Machine travel: 800 mm (according to user requirements expansion)
Test speed: 20 ~ 200 mm / min (computer input can be adjusted
Speed accuracy: less than ± 0.5%
Decomposition degree of displacement: 0.001 mm
Data sampling frequency: 200 times / sec
Shutdown mode: upper and lower safety settings, emergency stop, the
specimen damage detection, program strength and elongation settings
Display device: Computer display (including power, displacement,
Drive: AC variable frequency motor
Transmission: high-precision screw
Volume: (W × D × H) 69 × 50 × 162 cm
Weight: about 135 kg
Power: 1 ∮, 220V, 15A or specified
A set of fixtures (according to product requirements)
A set of test software,
1.Can I visit Yuanyao factory? Can your factory arrange
transportation for me?
My dear, it is a great honor to invite you to visit Yuanyao
factory. We can arrange our driver
to pick you up from your hotel when you arrived in Guangzhou City.
2.Can your factory print our brand on the product?
Our factory can laser print customer’s logo on the product with the
permission from customers.
Customers need to provide us a logo usage authorization letter to
allow us to print customer’s logo on the products.
3.Does your factory have the design and development capabilities,
we need the customized
The staffs in our R&D department are well experienced in the
Climate testing industry, with more than 5
years experience. We can make customized products especially for
you; please kindly contact us for more details.
If you are interested in our products,please contact us for further
information without hesitation.